AC converter (AC source) » EAC-K-1 & EAC-K-3

EAC-K systems are controllable AC sources where the output voltage and the output frequency can be adjusted to supply different AC consumers with different voltages and frequencies. E.g. in the test area, test laboratory or in development. The built-in LCD display shows the frequency, output voltage and output current. Voltage control e.g. 100-260V, 40-270V Frequency control e.g. 45-65Hz, 360-800Hz Systems available 1-phase or 3-phase.

Technical data:

  • Outputs from 1 kVA to 30 kVA, 1- or 3-phase or switchable from 1-phase to 3-phase operation
  • AC input 110V to 690V
  • AC input 45Hz to 400Hz
  • AC output 45Hz to 800Hz
  • Setting range e.g. 45Hz-65Hz, 50V-260V
  • 1-Ph up to 10kVA
  • 3-Ph up to 30kVA

Features:

Following features are available for the EAC-K-1 and EAC-K-3 series, further features can be found in detail in the data sheet

  • Analogue / digital control and monitoring system with mains monitoring, current inrush limiter
  • Short-circuit proof
  • Overload resistant depending upon dimensioning 1,2,3 multiple
  • Galvanic isolation
  • Visual messages /LED
  • Digital interface RS485/LAN (optional)
  • Automated test facility
  • Different housing techniques
  • Protection class up to IP53 (on request)
  • Special versions available on request

Downloads:

Datasheet EAC-K-1

Applications:

The AC converters can be used for different networks e.g:

  • Aircraft board net
  • Submarine networks
  • European network,
  • American network
  • Canadian network
  • Asian network
  • and many other networks and network forms such as TN-C, TN-S, TT, TN-C-S etc.