Controllable, programmable DC sources » LAB/HP

VOLTAGE: UP TO 2000V | CURRENT: UP TO 165.000A | POWER: UP TO 3.3MW

LAB/HP are adjustable 19" power sources in the power range from 3kW to 3.3MW in a compact design of up to 30kW in only 3U. We as developer and manufacturer can realize your individual wishes next to our standard device.

Technical data:

3kW to 3.3MW
Output voltage up to 1500V (2000V)
Output current up to 165.000A
Standard input voltages DC&AC also according to customer requirements
30kW in 3U

Features:

The LAB/HP series has the following features, further features can be found in detail in the datasheet

Power increase through master-slave mode up to 3.3MW
Generation of any voltage and current curves via USB stick or digital interface (sequential control)
Data log function: Current operating values are stored on a USB stick at an adjustable interval.
Available digital interfaces IEEE488, RS485, RS232, LAN and USB
Constant voltage (CV), current (CC), resistance (CR) and power (CP) operation, as well as PVcharacteristic curve simulation
ATI 5/10 analog interface galvanically isolated: 0V to 5V or 0V to 10V (user selectable) and soft interlock
Adjustable filter function for the analog interface
Available modes: UI, UIR, UIP and PVSim
Leadless remote sensing
Adjustable voltage and current rise time (U- and I-Slope)
Umax and Imax adjustable by the user to limit output voltage or current
Adjustable switch-off time for the device after pressing the start button
Storable U / I output characteristic (e.g. for PVsim, shading) on USB stick
"High Speed" rise and fall time of the DC output voltage is reduced by a factor of 10 on average compared to standard times
Temperature controlled fan
Display via TFT touch display (values, status display and mode selection)
Via function USB stick Function generator with different curves
auto ranging function
Controllable via WLAN
Support SCPI command language
Protective functions: OVP, OCP, UVP (adjustable time)
LabView driver available
Control software for Windows
External sense outputs
Fast crossover between CV & CC

Downloads:

Datasheet High Power Datasheet Manual Manual - Option E Pole-changer Application Videos Gallery

Applications:

Independent stand-alone test station realizable via script control in connection with the data log function
Manual testing of varistors
Simulation of solar modules simulate
Testing of photovoltaic components e.g. inverters or battery charge controllers
Simulation and investigation of engine starting gears (car starting curve)
Testing of automotive electronics and aircraft applications
Charging of fuel cells
Energy storage technology
Testing of semiconductors
Testing DC/DC converters

Back