Schattenwurf

Haute tension

La société ET System electronic propose une gamme particulièrement étendue de sources haute tension. Le développement et la fabrication sous notre propre régie des alimentations de laboratoire ultraprécises permet une intégration rapide dans les systèmes en exploitant des formes de boîtier les plus diverses. Grâce à l’utilisation de la technologie avant-gardiste des convertisseurs à résonance, nos alimentations HT appartiennent à la catégorie des appareils les plus petits, les plus légers et les plus performants du marché.

La gamme standard de nos alimentations HT couvre une très large plage de tensions de sortie et de dimensions de boîtier garantissant ainsi une intégration optimale des appareils dans tout type d’application. Des versions différentes des appareils standard sont réalisées selon les spécifications des clients. La multitude des possibilités de variation ouvre pour nos alimentations HT un champ d’utilisation quasiment universel, comme par exemple pour des applications à magnétrons ou à laser, pour l’alimentation de tubes à rayons X ou pour des systèmes d’accélération.


APS/BPS 0,6 - 3 Watt

Modules haute tension pour circuit imprimé jusqu’à 3.000 VDC

  • APS-Serial (up to 0,6 W):High voltage up to 600 V by output current up to 6 mA
  • BPS-Serial (up to 3 W):high voltage up to 3 kV by output current up to 6 mA
  • Wide input range
  • Polarity positive or negative
  • Output stabitility
  • Patent pending resonance mode design
  • Low ripple and noise
  • Low RFI emission
  • Special versions on request

CPS/EPS 12 - 60 Watt

Modules haute tension jusqu’à 30 kV

  • CPS- Series (up to 12 W):high voltage up to 30 kV by output current up to 20 mA
  • EPS-Series (up to 60 W): high voltage up to 10 kV by output current up to 120 mA
  • Polarity TBA
  • Output stabitility
  • Patent pending resonance mode design
  • Low ripple and noise
  • Low RFI emission
  • HV-Output over HV-Cable (optional SHV-connector)
  • Electrical connection over D-SUB 9 connector or H15-din connector
  • Special versions on request

DPS 12 W

Modules haute tension de précision jusqu’à 7.000 V

  • DPS-Serial (up to 12 W):Precision high voltage up to 7 kV by output current up to 10 mA
  • Polarity TBA
  • High stabilize output voltage
  • Voltage- and current limit over Trim pot
  • Low ripple and noise
  • Low RFI emission
  • Electrical connection over D-SUB 9 connector
  • HV-Output over SHV or HV-Cable
  • Patent pending resonance mode design
  • Special versions on request

GPS/HP 0,3 - 3 kWatt

Appareils haute tension de table jusqu’à 30 kV

  • AC-power modular high voltage-PSU from 300 to 3000 Watt OEM-Module or a 19" rack-version
  • High voltage up to 30 kV by output current up to 3 A
  • Excellent dynamic response and regulation
  • Patent pending resonance mode, with very low RFI-impact
  • Extremely high efficiency, up to 95%
  • PFC with wide input (optional)

GPS - series

  • Analogy regulation, opt. over Interface (RS232, CAN, IEEE 488)


HPS - series

 

  • Manuel front panel-handling, CAN- and RS232-Interfaceoptional: analogy I/O and/or IEEE 488

SHQ 6 - 12 Watt

Appareils haute tension de table jusqu’à 6 kV, à plusieurs voies

  • Precision-high voltage single and dual laboratory PSU
  • Precision output with lowest ripple and noise
  • Simultaneous display for voltage and current
  • Current accuracy 1nA, opt. 100pA
  • Voltage accuracy 100mV, to 4 KV opt. 10mV
  • Polarity switch able
  • Test supplies sub. HF Cable, residual current measurement
  • Interface control over RS232- or CAN
  • IEEE Interface in preparation

EHQ 12 Watt

Modules HT, cassette format Europe 3U jusqu’à 4 kV

  • Precision high voltage sources single euro format 3 HE/U
  • Voltage and current over LCD-Display
  • Reverse polarity
  • Voltage- and current-limit setting over 10 - % stepp switch
  • Output overload and short-circuit protected
  • Interface RS 232, CAN or analogy

NHQ 12 Watt

Modules haute tension NIM jusqu’à 6 kV, à plusieurs voies

  • High voltage-Module in 1/12 NIM standard-cassette
  • Versions in HIGH PRECISION, STANDARD, LOWCOST
  • 1 Channel - and 2 Channel - versions at same dimensions
  • LCD display to voltage or current
  • Voltage output rise time
  • Reverse Polarity
  • O/P protection
  • Overload- and short circuit protected
  • SHV-connector in back
  • Interface RS232 (opt. CAN) or analoge

CHQ 12 Watt

Modules haute tension CAMAC jusqu’à 12 kV, à plusieurs voies

  • High voltage modul in 2/25 CAMAC Standard-Cassette
  • Versions in HIGH PRECISION and STANDARD
  • 1 Channel - and 2 Channel - versions at same dimensions
  • LCD display to voltage or current
  • Voltage output rise time
  • Reverse Polarity
  • O/P protection
  • Overload- and short circuit protected
  • SHV-connector in back
  • Interface CAMAC-Bus control

VHQ 6 Watt

Modules haute tension VEM jusqu’à 5 kV, à plusieurs voies

  • VME- high voltage modul in 2 Slot-format
  • 1 Channel - and 2 Channel - versions at same dimensions
  • LCD display to voltage or current
  • Voltage output rise time
  • Reverse Polarity
  • Overload- and short circuit protected
  • SHV-connector in back
  • Complete over VME bus control

EHQ 8006-F/8 10Watt

Systèmes haute tension à voies multiples, 8 voies, 600 V/1,2 Watt chacune

  • 8 channels, o/p 600 V / 2 mA
  • Each channel separately over CAN controllable
  • Each channel floated ( max. 1000 V against GND )
  • Low ripple and noise ( < 1mVss )
  • 6 Current measurement ( < 100 pA resolve )
  • Hardware current- and voltage limit each channel
  • More protection, sub. Safety loop, down ramp
  • Very compact
  • Each Modules controlled over CAN - Interface
  • Simple System crates up to 8 Module with out own intelligence
  • Through chaining with multi channel high volt CAN Controller ( MHCC64 ) too for an unlimited period system's loose

Data sheet: Please Contact Factory


EHQ F XXX/16 4Watt

Modules haute tension 16 voies jusqu’à 1 kV/0,2 - 5 W chacune

  • 16 Channels, in 3 Types o/p 500 V / 0,5 mA , 1000 V / 250 µA or 1500 V / 150 µA
  • Positive or negative output voltage at factory
  • Low ripple and noise ( < 10mVss )
  • Current measurement with 12 Bit resolution
  • Voltage control and -measurement with 16 Bit resolution
  • Hardware current limit per Module
  • More protection, sub. Safety loop, down ramp
  • Very compact
  • Very compact ( 6 HE Euro cassette )
  • Each Channels controlled over CAN - Interface
  • Simple System crates up to 8 Module with out own intelligence, optional with floating ( voltage between module-GND and PE 300 V )
  • Through chaining with multi channel high volt CAN Controller ( MHCC64 ) too for an unlimited period system's loose

Data Sheet: Please Contact Factory


EHQ 20 XXX/32 4Watt

Modules haute tension, jusqu’à 32 voies et jusqu’à 2,5 kV/50 mA chacune

  • 2 forms with 32 or 16 independent channels,channel voltage up to 2500 V at 50 µA
  • Positive or negative output voltage at factory
  • Low ripple ( < 10mVss )
  • Current measurement with 12 Bit resolution
  • Voltage control and -measurement with 16 Bit resolution
  • More protection, sub. Safety loop, down ramp
  • Very compact (6 HE Euro cassette)
  • Each Modules controlled over CAN - Interface
  • Simple System creates up to 8 Module without own intelligence, optional with floating (voltage between Module-GND and PE 300 V)
  • Through chaining with multi channel high volt CAN Controller (MHCC64) too for an unlimited period system's loose

Data Sheet: Please Contact Factory